FAQ's

1. How fast is the Fastlane swim current?
2. Is the speed of the Fastlane swim current adjustable?
3. How is the Fastlane swim current generated? Is it safe?
4. What are the power requirements?
5. Where can I put the Fastlane power unit?
6. What cold weather maintenance is required?
7. Can the Fastlane be used with a salt system?
8. Will the Fastlane Fit in my pool?
9. How big is the Fastlane swim unit?
10. How does the Fastlane attach to my pool?
11. How far from the pool edge does the mounting bracket have to go?
12. Who’s going to install the Fastlane?
13. Can the Fastlane be moved or removed?

1. How fast is the Fastlane swim current?
The standard Fastlane® produces a non-turbulent current that has a top speed equivalent to approximately a 22-minute mile pace. The optional Hi-Performance current reduces that time to a 17-minute mile pace. Back to FAQ's

2. Is the speed of the Fastlane swim current adjustable?
The Fastlane uses a remote control to adjust the speed to suit any level of swimming or exercise ability. Back to FAQ's

3. How is the Fastlane swim current generated? Is it safe?
For safety, all swimming machines manufactured by Endless Pools, Inc. are powered by hydraulics to keep electricity away from the pool area. Similar to the hydraulic control systems used in aircraft, the rugged five horsepower hydraulic power unit is located remotely with your pool equipment or in a garage or shed. Environmentally safe, biodegradable vegetable oil is used to power the Fastlane. Up to five gallons of fluid flow per minute to and from the Fastlane in 1/2" diameter hydraulic hoses. This fluid powers the special hydraulic motor in the Fastlane, which turns the propeller and generates the swim current. Back to FAQ's

4. What are the power requirements?
The Fastlane Power Unit is the heart of the hydraulically generated swim current. Located remotely from the pool, the Power Unit requires 220 Volt, 30 Amp, GFCI service; similar to power requirements of a common household clothes dryer. Back to FAQ's

5. Where can I put the Fastlane power unit?
The power unit can be installed either indoors or outdoors. It should be elevated fromt he ground and placed on a flat surface. The motor is not designed to be run in a wet environment and suitable protection is required if the Power Unit is installed outdoors. If you choose to locate your Power Unit in an unprotected area, it is recommended the Outdoor Power Unit with Weather Guard be purchased for added protection.  Back to FAQ's

6. What cold weather maintenance is required?
At the end of the swimming season, it is recommended the Fastlane Swim Unit be removed from the swimming pool and winterized. In addition, the Outdoor Power Unit with Weather Guard should be covered completely and secured tightly. Freezing will not affect the oil that remains in your hydraulic hoses. Back to FAQ's

7. Can the Fastlane be used with a salt system?
Yes, if the pool and Fastlane Swim Unit are both properly bonded. Back to FAQ's

8. Will the Fastlane Fit in my pool?
The Fastlane Swim Unit is designed to fit in virtually any pool. We recommend that the pool have 200 sq. ft. of surface area and have 35" water depth at the location where you plan to install your Fastlane. Back to FAQ's

9. How big is the Fastlane swim unit?
When unpacked completely assembled, the Fastlane swim unit is 34" tall, 18" deep and 21" wide.  When the rails are attached to the Fastlane, they add an additional 2" on each side to bring the width to 25". The rails extend 19" above the Fastlane and 16" behind the pool wall. When the Fastlane is installed on your pool deck, the rails rise approximately 13" above your pool deck, depending on the freeboard height. Back to FAQ's

10. How does the Fastlane attach to my pool?
There is a 6" long stainless steel mounting plate that is anchored to your pool deck with three fasteners. There are two 1 ½" long stub tubes on this mounting plate and the deck rails of the Fastlane slip over these stub tubes to secure the Fastlane to the pool deck. Back to FAQ's

11. How far from the pool edge does the mounting bracket have to go?
The rails attach to your pool deck 16" back from the pool wall. There is a cover for the deck plate and hose fittings that extends back an additional 12". Keep in mind that every pool wall is different and your individual situation may vary. Back to FAQ's

12. Who’s going to install the Fastlane?
The Fastlane can be self-installed by a reasonably handy homeowner or by one of our Factory Trained Installers. If necessary, any electrical modifications should be completed by a licensed electrician. Back to FAQ's

13. Can the Fastlane be moved or removed?
The Fastlane can easily be removed from your swimming pool. Additionally, you can have several installation locations for your Fastlane as long as you have additional mounting plates and your hydraulic hoses are an adequate length.Back to FAQ's